BPHWT - ALSOLDER 500
- MSDS: BPHWT
- Manufacturer: HARRIS J W CO INC
- Product Name: ALSOLDER 500
- National Stock Number: 3439-01-346-8987
Product Identification
Product ID:ALSOLDER 500
MSDS Date:04/01/1990
FSC:3439
NIIN:01-346-8987
Kit Part:Y
MSDS Number: BPHWT
Responsible Party
CINCINNATI, OH 45242-4110
US
Emergency Phone: 800-424-9300
Info Phone: 513-891-2000
Cage: JO820
Contractor
Telephone: 513-891-2000
Cage: 27911
Ingredients
CADMIUM (SARA III)
CAS: 7440-43-9
RTECS: EU9800000
Fraction By Weight: 83%
OSHA PEL SEE 1910.1027
ACGIH TLV: 0.01 MG/M3 DUST;9394
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
ZINC (SARA III)
CAS: 7440-66-6
RTECS: ZG8600000
Fraction By Weight: 17%
OSHA PEL 10 MG ZNO/M3
ACGIH TLV: 10 MG ZNO/M3; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION OF FUMES MAY CAUSE
RESPIRATORY SYSTEM IRRITATION AND METAL FUME FEVER. CHRONIC:
PROLONGED OR REPEATED INHALATION OF CADMIUM FUMES MAY CAUSE CANCER.
Explanation of Carcinogenicity:CADMIUM IS LISTED BY NTP AND IARC.
Effects of Overexposure:COUGHING, WHEEZING, SNEEZING, CHILLS, WEAKNESS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALED: REMOVE PERSON TO FRESH AIR. GIVE RESPIRATORY SUPPORT
IF NEEDED. GET IMMEDIATE MEDICAL ATENTION. EYES: FLUSH WITH LOTS OF
WATER FOR 15 MINUTES WHILE HOLDING EYELIDS OPEN. SKIN: WASH WITH
SOAP AND WATER. INGESTED: GET IMMEDIATE MEDICAL ATTENTION.
Fire Fighting
Extinguishing Media:MEDIA APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
BUNKER GEAR.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:SWEEP UP AND PLACE IN A CONTAINER FOR LATER
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR OR AIR-SUPPLIED RESPIRATOR IN CONFINED SPACES OR IF TLV
IS EXCEEDED. USE IN ACCORDANCE WITH 29 CFR 1910.134.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION OR LOCAL EXHAUST TO
KEEP EXPOSURE BELOW TLV/PEL.
Protective Gloves:WELDERS GLOVES
Eye Protection:FACE SHIELD/GLASSES WITH PROPER LENSES
Other Protective Equipment:OTHER SAFETY EQUIPMENT AS NEEDED.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING.
Supplemental Safety and Health
KEY1=N1.
Chemical Properties
HCC:N1
Appearance and Odor:WIRE, GRAY TO SILVER IN COLOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:METAL OXIDE FUMES
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.